sharkey@ale.physics.sunysb.edu wrote:
> > Here is an attachment from cat proc/pci and about the other questions (if I
> > compiled the kernel myself) the answer is no.
> > My Linux distribution is Red Hat 6.0. During installation, the program asked
> > me about installing drivers for my adapter and I tryed the rtl8129 and
> > rtl8139 compatible but the system answered "Can't find such device".
>
> That's interesting. This is the relevant part of your /proc/pci:
>
> Bus 0, device 11, function 0:
> Ethernet controller: Unknown vendor Unknown device (rev 16).
> Vendor id=1. Device id=8139.
> Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
> I/O at 0xd000 [0xd001].
> Non-prefetchable 32 bit memory at 0xe0800000 [0xe0800000].
Your vendor id is 1, your I/O region size is 1, and your MMIO region
size is zero.
consider that the driver needs 0x80 bytes worth of registers, at least,
it is not surprising that things do not work.
Miguel, can you
* download latest pciutils (2.1.5, listed on http://freshmeat.net/)
* boot into a Linux 2.3.x kernel
* e-mail the linux-realtek list with the output of "lspci -vvvxxx"
If this command LOCKS YOUR COMPUTER, which it might, reboot and run
"lspci -vvvx"
Regards,
Jeff
-- Jeff Garzik | Writing software is Building 1024 | more fun than working. MandrakeSoft, Inc. | -Anon | To unsubscribe, send mail to Majordomo@cesdis.gsfc.nasa.gov, and within the | body of the mail, include only the text: | unsubscribe this-list-name youraddress@wherever.org | You will be unsubscribed as speedily as possible.
This archive was generated by hypermail 2b29 : Sun Feb 27 2000 - 02:22:06 EST