1. Make sure the switch port you are connected to is configured to be
100Mbit.
2. If it still doesn't work, put the card in a PC with windows, install the
cards software and configure it to auto speed detection or even force it to
100 Mbit and then put it back in your Linux box.
================================
Yaron Ashkenazi
Technical Manager
Compedia LTD.
ox@compedia-usa.com
ICQ# 28184656
================================
----- Original Message -----
From: Luke Miller <millerlu@peak.org>
To: <linux-vortex-bug@cesdis1.gsfc.nasa.gov>
Sent: Friday, February 12, 1999 3:45 AM
Subject: card defaulting at 10 MB...
>
>I have a 3C-905B card, I compiled the kernel (2.0.36) and included the
>drivers and the card works fine at 10 MB. I would like to get it to run
>at 100 MB, the lights on the back of the card and on the switch both tell
>me it is running at 10 MB. How do I go about making it default to 100 MB?
>Thanks,
>
>Luke
>
> ***********************************************************
> * Luke Miller System Administrator *
> * millerlu@peak.org 541-754-7325 *
> ***********************************************************
>
>
>
This archive was generated by hypermail 2b29 : Wed Jan 12 2000 - 12:00:36 EST